multi-function Busbar processing machine
Part 1:Main features :
1. This model used turret for punching work, Max. 8 sets of tooling (punching or embossing) can be stored in.
The guide sleeve and punching head slide against each other, which ensure good coaxiality and long life of toolings.
6. The machine use high quality hydraulic system and imported hydraulic elements, Φ10mm big drift diameter solenoid valve, which is of low noise and stable performance.
Part 2:Main parameters
Work table dimension(mm)
Total Motor Power(KW)
Hydraulic Station QTY*SPEC.(Mpa)
Control method: PLC+ Bending angle NC control
Max. Diameter of Punching hole
Bending unit (Bending angle NC control)
The max. processing dimension when doing vertical bending: width*thickness=100mm*10mm
Part 3: General description of each work unit
It can finish round hole punch, oblong hole punch, square hole punch and embossing etc through change of die.
Two kinds of shearing method for your choice.-punching shear and single shearing.
For punching shear the verticality of the end surface is guaranteed, no deformation of workpiece and the end surface is bright and good appearance. But it wastes the raw material a little.
For single shear, there is a little bevel angle on the work piece but it wastes no raw material.
Plain (horizontal) bending, vertical bending ,elbow pipe bending, connecting terminal and copper busbar bending etc can be carried out via changing of die. The die is simple and easy to change.
Part 4: Accompanying standard toolings:
Round and oblong holes total 8 sets, size as per customer’s requirement
Note: The connecting terminal die is not included in the standard tooling, if it is needed, pls inform us cable sizes.
Multi function busbar processing machine | busbar processing machine | BM503-S-8P Multi function busbar processing machine